Description

OBD 2 CAN Tester Box 12-24V with 1.5m Extension Cable for Automobile Diagnostics.

The 16 pin OBD breakout boxes are pass- through devices that are primarily designed as a convenient method of access to the vehicles 16 pin OBD port, to provide a place to connect a multimeter, oscilloscope and scantool, this allows us to check powers and grounds and view communication signals and live data, all at the same time if you have a need. 
These tools have evolved over time to be diagnostic tools in their own right, with each of the 16 pins incorporating an led to indicate activity on the appropriate comms buses and for the presence and correct polarity of powers and grounds. 
These tools now feature an inbuilt meter to indicate the battery supply voltage; this on its own can save considerable time in the event of a “no comms” when you plug in your scan tool. 

The DM91-8007 actually displays the voltages on all 16 pins, so you could immediately read the voltage levels on CAN HIGH and CAN LOW, LINBUS or K-LINE, which could give you very good direction. 

These tools also have other features that can prove useful such as a means to provide power to the vehicle when disconnecting the battery, so keeping the memory alive and saving time, e.g. throttle re-learn, audio coding etc. 
It is also possible to utilise these tools to configure OBD 1 connectors to OBD 11, there are still some pre 1996 vehicles out there.

The DM91-8007 also comes with a range of jumper cables and connectors, it has provision for a 12volt supply and has inbuilt, switchable, 120ohm resistors for pins 6 and 14, CANHIGH and CAN LOW, and pins 3 and 11, OEM determined. 
This tool is also suitable for either vehicle or bench use. 
The ability to read true RMS voltage on all channels simultaneously is a great feature.

Packaging comes with a clamshell case.

This is a very handy tool for those that want more from their breakout box!

Features:
- CAN Tester Box is a CAN Bus circuit tester compatible with 12 and 24 volt systems.
- Testing DLC (OBD port) if any error before connecting connecting other diagnostic equipment to DLC, such as pin short circuit and polarity reverse connection.
- Real-time display of communication signals ( such as communication protocol signals ) on the allocated pins which can quickly locate faults and replace the voltage measurement function of digital multi-meter.
- Fast connect 16 pins during vehicle maintenance diagnosis.
- Monitoring input voltage of OBD when burning module, high and low voltage alarm.
- Quick short obd Porsche communication 3-7.
  Short-circuit obd VW key all lost 1-6.
  Short-circuit obd Mitsubishi remote control 1-4.
  Short-circuit obd Toyota sync 4-13.
- OBD workbench CAN boot box.
- Memory saver function when replacing the battery.

Specification:
- Input Voltage: 9.0-32.0VDC  
- Maximum Load: 2.0A  
- Resolution: 0.1V
- Overload protection: Yes, PTC fuse (self-healing)
- Reverse polarity protection: Yes, LED on Pin 4&5 turn red
- Protocol standard: PWM (J1850), VPW (J1850), ISO 9141-2, DIS/ISO 14230-4, CAN (J-2284)
- Operating temperature: 0℃„ƒ-50℃
- Humidity: <70%
- Banana socket: 16Px2.0mm
- OBD cable length: 75cm (29.5inch) / 150cm (59inch)

Specifications

SKU DM91-8007
Brand Ozwide Tools

Reviews

Be The First To Review This Product!

Help other Ozwide Tools Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a review
More From This Category
SKU: DM14-5009 Test Probe 4pc Set - Soft PVC for Piercing

$41.80 Inc. GST

SKU: DM16-HT311 BNC Male to Twin 4MM Female Adapter

$12.10 Inc. GST

SKU: DM16-HT306 6 Way Breakout Leads, Set 4

$147.40 Inc. GST

Similar Items
SKU: DM16-HT2018B Auto Battery Tester

$79.20 Inc. GST

SKU: DM13-518B 23pc Terminal Connector Release Tool Set

Now  $200.00 Inc. GST RRP $257.40

Sale
SKU: DM106-BA107 12V Automotive Lead-Acid Battery Tester

$62.70 Inc. GST