This kit enables you to remove and reinstall most bearing and ABS tone rings (reluctor) on Toyota vehicles only.
Allows for removal of the wheel bearing without having to remove the ABS rings on most models
It will fit any symmetrical 4-stud circle from 100mm to 140mm with 10mm or 12mm studs.
Bolts to the bearing flange and must be used with a 20-ton hydraulic press.

PLEASE NOTE:
This tool is based off an American tool and therefore suits American Toyota models only.
For models such as the Landcruiser and Prado please see DM34-620
To work on Toyota Landcruiser you may also need the DM34-6045 extender adapters.

This Axle Bearing Puller Set is suitable for:
Toyota 4Runner 1995-2020 / Toyota Hilux 2004-2012,Toyota Tacoma 1995-2004 / Toyota T100 1995-1998 / Toyota FJ

This kit also includes a 40mm bearing driver. Use this with your press to install 40mm bearings. 
It's tall enough that the bellcrank will clear the press bed.
Features a view port so that you can easily see the press action. 

PLEASE NOTE: We have been told for the Toyota Hiace 2008 model this tool wlll work to remove the bearing but you still need to remove the ABS ring as the plate does not fit on Hiace models (not sure about later models)
PLEASE NOTE: We have also been told for early model Toyotas without the ABS ring you need to use the DM34-600