Used to hold the crankshaft pulley while removing and replacing the centre crankshaft bolt on Honda vehicles.

This Honda speciality tool has been made due to the left hand spinning engines in the Honda causing many to have trouble when undoing the crank pulley bolt.
This speciality tool is designed to assist with this by holding the crankshaft pulley while allowing you to still get your socket through to crack the bolt. This tool will fit any Honda with a crank pulley that has a 50mm diameter female Inhex.

How to use this tool:
1. Break loose the crank shaft pulley/harmonic balancer bolt.
2. The 50mm hex head armature will slip past the lightest of spaces and slides right into the center slot on the pulley.
3. Then slide the long bar onto the receiving end of the armature and lock it into position.

Models: 
               Accord 2.0L / 2.2L Vtec 97-
               Accord 2.2L DOHC Vtec 93-97
               Aerodeck 2.2L 93-
               Civic 1.4L / 1.6L 01-
               Civic Coupe 1.7L 01-
               CRV 2.0L 96-01
               Del Sol, Element 2.4L i-Vtec 03-06
               Fit / Insight / Odyssey 2.2L / 2.3L Vtec / 3.0L V6 Vtec 94-99
               Pilot 3.5L V6 Vtec 03 -
               Prelude 2.0L 97
               Ridgeline 3.5L V6 05-
               S2000 2.0L 99-09
               Shuttle 2.2Li / 2.3Li 95-01
               CL / lntegra / Legend 3.5 V6 96-02
               MDX / RL / RSX / TL / TSX
               Also used on ROVER: 618 / 620 / 623 93-99 

OEM: 07JAB-0010200 / 07JAB-0010202B / 07JAB0010200 / 07JAB0010202B