Glow Plug Electrode Remover Tool Set M8 & M10

This tool designed for when the glow plug undoes and is removed - but the electrode has broken off and is sitting inside the head chamber - they have very small drill bots in the kit that allow you to drill a small 2.5mm hole in the broken electrode - then you can tap a small M3 thread into the broken electrode and cut a small M3 thread - then you can use the extractor to remove the broken electrode.

KEY:
1. Drilling Guides: M8 x 1, M10 x 1, M10 x 1.25mm
2. Drills: Ø 2.5, 3.3mm
3. aps: M3 x 0.5, M4 x 0.7mm
4. Extraction Adaptors: M8 x 1, M10 x 1, M10 x 1.25mm
5. Threaded Rods: M3 x 0.5, M4 x 0.7mm
6. Extractor Nuts

NOTE: This kit won't do ceramic and iridium-platinum alloy electrodes present in high-end diesel vehicles, before purchasing this tool check the electrode component material at the manufacturer's manual. Other option to get metal alloy tips out is using the phishing method dropping it to the chamber and picking it up through the injector with our pick up magnet tool SW77260027. Unfotunately there is no extraction method for broken plain ceramic tips we can offer.